December is the month of trips, family visits and a few days away over New Year. So what happens to your garden? The good news is that a GroHo hydroponic system already does most of the work on its own: the submersible pump and the timer keep the nutrient solution flowing, so there's no watering to do.
Still, a few days with nobody at home call for a little preparation. Here's what to do now, in the week before you leave and when you get back.
Start now: plan your harvests around the holidays
The secret is in the calendar. In GroHo gardens, lettuce takes on average 30 to 40 days from sowing to harvest. In other words, whatever you sow in mid-November should be ready around Christmas.
- Harvest before you leave. Bring fresh lettuce, rocket and herbs to the family dinner, or give them as a gift.
- Don't leave freshly sown seeds behind. During germination, phenolic foam must never dry out and needs daily attention. If you're going away, sow before or after the trip. See our guide to starting seeds in winter.
- Leave the well-rooted plants in the system, in the growing channels. They are the ones that cope best with a few days unattended.

The week before you leave
1. Clean the pump and check the tubes
Check and unclog the pump and filters, and remove any dead roots or plant debris that has built up in the system. A blocked filter is the one problem you don't want to discover from a distance.
2. Check pH and EC
Before you go, make sure the solution is balanced. As a guide, the ideal pH is around 5.5 to 6.5, and for lettuce EC is usually between 1.2 and 2.0 mS/cm. The Combo Meter (pH / EC / TDS) measures pH, EC and TDS with a single probe and automatic temperature compensation. If you need to adjust, use pH Down or pH Up.
3. Fill the reservoir
The day before you leave, top up the nutrient solution to the maximum level of the reservoir. Remember: the solution is only ever topped up as your plants use it, and it's replaced only when the EC is low. The bigger the volume, the more stable the solution stays; for lettuce you can allow 0.5 to 1.0 litres per plant.
4. Test the timer

GroHo gardens come with a timer set to cycles of 15 minutes on / 15 minutes off. Before you leave:
- check that all the segments are set to the right cycle and that the clock shows the correct time;
- watch one full cycle to confirm that the pump starts, the water flows through every channel and drains back into the reservoir;
- if you use LED lighting, put it on its own 24-hour analogue timer (up to 48 programs a day, in 15-minute steps). For more on winter light, read how to use LED light in your hydroponic garden this winter.
Protect your garden from the cold
If your garden is on a balcony or terrace, cold nights are the biggest risk while you're away. Water temperature should stay between 18 and 22 °C.

- Move it if you can. The Vertical Mobile Garden is mobile and can be moved somewhere more sheltered, out of direct sun on the reservoir.
- Warm the solution. A reservoir water heater keeps the temperature regulated (from 20 to 34 °C). The rule is 1 W per litre where temperatures are stable, and 2 W per litre when it's very cold. The heaters are in our accessories.
Leave a simple checklist for whoever stays
If a neighbour or family member can pop in, a short list is all they need:
- Check that the pump starts and the water is flowing.
- Look at the reservoir level and top up with ready-mixed solution if it drops a lot.
- Remove dry leaves or sick plants.
- Harvest whatever is ready: the best reward for their help.
When you get back
Check pH and EC again, top up whatever the plants have used and give the filters a quick clean. Then all that's left is to sow again and plan your January harvests.
Don't have a garden yet? Browse our horizontal gardens, such as the Horizontal Garden – 60 plants, and our vertical gardens, and read our ideas for a hydroponic garden as a Christmas gift. Questions before you go? Get in touch.
Happy holidays and happy growing ;)

